Dry Mortar

Dry Mortar


Dry Mortar LEiBEL is a high-quality ready-made instant cement that is created to facilitate building work, just mix it with water to produce a homogeneous mixture.

 


LIGHTWEIGHT BRICK ADHESIVE (LB-T)

 

29

Instant cement as an adhesive for light brick (AAC) installation work with a thickness of 3 mm. Made from cement, silica sand, fillers and additives which are homogeneously mixed.

Application thickness: Recommended 3 mm thick.
Water Requirements: 8-9 liters for 40 kg LB-T
Coverage / Zak: Thickness 10: spread 11-13 m², thickness 7.5: spread 14 – 16 m², thickness 12.5: power spread 8 – 9 m².
Work tools: Toothed roskets / trowels, rubber hammers, hand mixers, like a stir

 

HOW TO USE

1. Clean the surface from dirt and dust
2. Add 8-9 liters of water gradually
3. Stir until smooth for 3-4 minutes, it is recommended to use a hand mixer
4. Apply Leibel Adhesive on the surface of the AAC block by using the thinbed roskam / trowel evenly
5. Place the other AAC blocks above the previous application
6. Give pressure by hitting it using a rubber hammer to a specified height (thickness of installation space 3 mm)
7. Try to fill the space between the beams and avoid gaps

27 28

ADVANTAGE

1. Easy to use and ready to use, just need to add water
2. High adhesion and practical when applied
3. Stir thinner so it saves use of ingredients
4. Efficient in processing time thus saving costs
5. The work results are flatter and neater

 

>> Back


LIGHTWEIGHT BORDER & PLASTER (LB-PP) / (LB-PP-R)

 

30

 

Brick adhesives and plasters are a mixture of cement, filler, additives and packaged silica sand, only need to add water and stir it to be applied with a thickness of 10 mm for the installation of wall and light brick plaster and red brick.

Application Thickness: Recommended thickness of 10 mm.
Water Requirements: 9-10 liters for 50 kg LB-P
Coverage / Zak :

a. Brick couple:
– Red brick ± 1.4 m² / sack 50 kg / thickness application 10 mm
– Lightweight brick: ± 4 m² / sack 50 kg / thickness application 10 mm
b. Plaster:
– Red brick: ± 2.2 m² / sack 50 kg / thickness application 10 mm
– Lightweight brick: ± 2.5 m² / sack 50 kg / thickness application 10 mm
Work tools: Roskam, long steel / aluminum jidar, hand mixer, like a stir.
HOW TO USE

Brick adhesive

1. Clean the surface from dirt and dust
2. Mix 50 kg LB-PP with 9-10 liters of clean water
3. Stir until smooth for 5 minutes, for more optimal results it is recommended to use a hand mixer.
4. Apply LB-PP on the brick surface to reach 10 mm thick
5. Place the other brick above the previous application

Brick Plaster

1. Clean the surface from dirt and dust
2. Mix 50 kg LB-PP with 9-10 liters of clean water
3. Stir until smooth for 5 minutes, for more optimal results it is recommended to use a hand mixer.
4. Before doing a masonry plaster, for good results curing (the surface of the substrate must first be moistened with water)
5. Apply LB-PP with a thickness of 10 mm on the surface of the masonry using a roskam
6. Flatten using jidar so that you get a flat surface

29 30

KEUNGGULAN

1. Daya rekat tinggi dan praktis saat diaplikasikan
2. Konsistensi campuran tetap terjaga

 

>> Back


LIGHTWEIGHT BORDER & PLASTER Plus ( LB-PP PLUS )

 

lbpp plus

Brick Plus Adhesive and Plaster Plus is a mixture of cement, filler, additives, and packaged silica sand, only need to add water and stir it to be applied with a thickness of 10 mm for wall mounting work, light brick plaster, and also red brick.

Application Thickness: Recommended thickness of 10 mm
Water Requirements: 9-10 Liters for 50 kg LBP
Coverage / Zak:

a. Pair of Bata
– Red Brick: ± 1.4 m² / sack 50 kg / thickness application 10 mm
– Lightweight brick: ± 4 m² / sack 50 Kg / thickness application 10 mm
b. Plaster:
– Red Brick: ± 2.2 m² / sack 50 kg / thickness application 10 mm
– Lightweight brick: ± 2.5 m² / sack 50 kg / thickness application 10 mm
Work Tools: roskam, long steel / aluminum jidar, hand mixer, like a stir.

HOW TO USE

Brick adhesive

1. Clean the surface from dirt and dust
2. Mix LB-PP 50 Kg with 9-10 liters of water
3. Stir until smooth for 5 minutes, for more optimal results it is recommended to use a hand mixer
4. Apply LB-PP on the brick surface to 10 mm thick
5. Place other bricks above the previous application

Brick Plaster

1. Clean the surface from dirt and dust
2. Mix 50 kg LB-PP with 9-10 liters of clean water
3. Stir until a maximum of 5 minutes, for more optimal results it is recommended to use a handmixer
4. Before doing masonry plaster, for good results do curing

  1. ADVANTAGE
  2. Workability
    Weather resistant
    Minimizing cracks

 

>> Back

 


ACIAN LIGHT BRICK (LB-A)

 

32

Acian Light Brick  is a mixture of cement, filler and packaged additives, only need to add water and stir it to be used as acian on the plaster surface of the wall.

Color: ash
Application Thickness: Recommended 2-3 mm thick.
Coverage / Zak: Application thickness 2 mm: 13-14 m², Application thickness 3 mm: 8 – 9 m²
Water Requirements: 13-14 liters for 40 kg LB-A / LBA-R
Packaging: LB-A Woven 40 kg, LB-A-R Paper Sack 40 kg

 

HOW TO USE

1. Clean the surface from dirt and dust.
2. Add 9-10 liters of water gradually.
3. Stir until smooth for 5 minutes, it is recommended to use a hand mixer.
4. Apply Leibel Render with a thickness of ± 5 mm then flatten this application using jidar like a plaster application.
5. After half dry, puree using a metal roskam like the acian application.

3132

ADVANTAGE

1. Easy to use and ready to use only need to add water.
2. Plaster at the same time acian.
3. Minimizing cracks due to expansion shrinkage.
4. The consistency of the mixture is maintained.

 

>> Back

 



RENDER LIGHT BRICK (LB-RD)

 

34

Lightweight Brick Render (Plaster + Acian) is a mixture of cement, fillers, silica sand and packaged additives, only need to add water and stir it to be used as a plaster and at the same time for light brick with a thickness of 5 mm.

Color: ash
Application thickness: Recommended 5 mm thick.
Coverage: 3.3 – 3.5 m2 / 5 mm thick
Water Requirements: 9-10 liters for 40 kg LB-RD
Packaging: LB-RD Woven 40 kg

HOW TO USE

1. Clean the surface from dirt and dust.
2. Add 9-10 liters of water gradually.
3. Stir until smooth for 5 minutes, it is recommended to use a hand mixer.
4. Apply Leibel Render with a thickness of ± 5 mm then flatten this application using jidar like a plaster application.
5. After half dry, puree using a metal roskam like the acian application.

34

ADVANTAGE

1. Easy to use and ready to use only need to add water.
2. Plaster at the same time acian.
3. Minimizing cracks due to expansion shrinkage.
4. The consistency of the mixture is maintained.

 

>> Back

 



SKIM COAT (LB-SC)

 

35Skim Coat (Acian Concrete) is a mixture of cement, filler, additives, which are packaged only need to add water and stir it to be used as acian on concrete walls with thickness of 2-3 mm.

Color: ash
Application Thickness: Recommended 2-3 mm thick.
Cover / Zak: – Application thickness 2 mm: 13 – 14 m2 (40 kg LB-SC) and 6-7 m2 (25 kg LB-SC-R)

– Application thickness of 3 mm: 8 – 9 m2 (40 kg LB-SC) and 4-5 m2 (25 kg LB-SC-R)
Water Needs: 13-14 liters for 40 kg LB-SC and 5-6 liters for 25 kg LB-SC-R
Packaging: – LB-SC Woven 40 kg, LB-SC-R Paper Sack 25 kg

HOW TO USE

1. Clean the surface from dirt and dust
2. Mix LB-SC 40 kg with 13-14 liters of clean water or mix 25 kg LB-SC-R with 5-6 liters of clean water
3. Stir until smooth, for more optimal results it is recommended to use a hand mixer
4. Apply to the surface of the plaster / concrete with a plate plate, thickness 2-3 mm

35

ADVANTAGE

1. Has a good adhesive power
2. Minimizing cracks due to expansion shrinkage
3. You don’t need to use a plate
4. Save paint usage
5. Can be directly painted after 7 days

 

 

>> Back



TILE ADHESIVE (LB-TA)

36

Tile Adhesive is a mixture of cement, filler, additives and packaged silica sand, only need to add water and stir it to be used as adhesive for all types of ceramics on the wall or floor.

Color: ash
Application Thickness: ± 3 mm thickness is recommended.
Coverage: 7-8 m2 / 3 mm thick (40 kg LB-TA) and 4 – 5 m2 / 3 mm thick (25 kg LB-TA-R)
Water Needs: 9-10 liters for 40 kg LB-TA and 5-6 liters for 25 kg LB-TA-R
Packaging: LB-TA-R Paper Sack 40 kg and 25 kg

 

HOW TO USE

1. Clean the surface from dirt and dust
2. Mix 40 kg LB-TA / LB-TA-R with 9-10 liters of clean water or 25 kg LB-TA-R with 5-6 liters of clean water
3. Stir until smooth, for more optimal results it is recommended to use a hand mixer
4. Apply to the surface with a toothed roskam with a recommended thickness of 3 mm
5. Especially for the wall application wait for 3 minutes
6. Attach the ceramic to the surface that has been coated with Adhesive Tile

36

 

>> Back

 



TILE ON TILE (LB-TOT-R)

 

37

Tile On Tile is a mixture of cement, filler, silica sand and packaged additives, only need to add water and stir it to be used as adhesives for all types of ceramics on ceramic surfaces on walls and floors.

Color: ash
Application Thickness: ± 3 mm thickness is recommended.
Cover: 4 – 5 m2 / 3 mm thick (25 kg LB-TOT-R)
Water Requirements: 5-6 liters for 25 kg LB-TOT-R
Packaging: B-TOT-R Paper Sack 25 kg

HOW TO USE

1. Clean the surface from dirt and dust
2. Mix 25 kg LB-TOT-R with 5-6 liters of clean water
3. Stir until smooth, for more optimal results it is recommended to use a hand mixer
4. Apply to the surface with a toothed roskam with a recommended thickness of 3 mm above the old ceramic
5. Especially for the wall application wait for 3 minutes
6. Attach the ceramic to the surface that has been coated with LB-TOT.

37

ADVANTAGE

1. Easy to use and ready to use, just need to add water
2. High adhesive power and easy to apply
3. Ceramic walls do not deteriorate when installed
4. Resistant to expansion shrinkage
5. Ceramics are firmly attached and not easily separated
6. Sticking to old ceramics
7. Save material because of the thin application

 

>> Back

 


TILE GROUT (LB-TG)

 

38

Tile Grout (Nat Ceramic Filler) is instant cement for grout fillers with a minimum width gap of 2 mm and a maximum of 4 mm for the work of installing ceramics, granite and natural stone. Suitable for use on floors and walls. Made from cement, polymer, additives and pigments mixed homogeneously with a variety of color choices.

ADVANTAGE

1. Easy to do
2. Does not shrink
3. Strong adhesive power
4. Don’t crack

 

 

 

Detail

16

HOW TO USE
1. Clean ceramic and ceramic slits from dirt, dust or residual adhesive.
2. Moisturize the grout before applying using a wet sponge / cloth
3. Mix 1 kg LB-TG with 300 – 330 ml of water and stir until smooth and paste for 5 minutes.
4. Apply by filling the grout gap using the rubber trowel / rubber tape as desired. Make sure the grout gap is flat and solid.

 

 

>> Back

 


FLOOR LEVELING (LB-PL)

 

39

Floor leveling is instant cement for screed installation work, to increase the floor height or as a work floor before tile installation. Made from cement, silica sand / screening, fillers and additives which are homogeneously mixed. Packaged in 2 choices namely Economical and Premium

ADVANTAGE

1. Easy to use and ready to use, just need to add water
2. Has high adhesive power
3. Economical and very fast work
4. Low shrinkage

 

40

HOW TO USE

1. Clean the surface from dirt and dust
2. Stir LB-PL 50 kg with 5.5 – 6 liters of clean water for the Economic package and 7 – 8 liters of clean water for 3. Premium package
4. Pour the LB-PL mixture on the floor surface
5. Flatten using jidar
6. Wait until it’s half dry
7. Flatten using a roskam

39

 

>> Back



CONNECTION PANEL FILLER (LB-PSP)

 

41

Connection Fillers Panels are a mixture of cement, fillers and packaged additives, only need to add water and stir it to be used as a connection between the Floor Panels.

Color: ash
Cover: For 0.019 m3 / sack
Water Requirements: 7 – 8 liters for 40 kg LB-PSP
Packaging: LB-PSP Woven 40 kg

HOW TO USE

1. Clean the surface from dirt and dust
2. Add 40 kg LB-PSP with 7 – 8 liters of clean water
3. Stir until smooth, for more optimal results it is recommended to use a hand mixer
4. Pour LB-PSP on the connection between the panels until evenly distributed

40

ADVANTAGE

1. Easy to use and ready to use, just need to add water
2. Has high adhesive power
3. Economical and very fast work
4. Low shrinkage

 

 

>> Back


LIGHT WEIGHT CONCRETE REPAIR (LB-LCR)

 

43

Lightweight Concrete Repair is a mixture of cement, aggregate and additives with special compositions so that it has better adhesion in one package. Only need to add water and stir it. Ready to be used as a repair material or coating for lightweight floor panel surfaces (AAC). Packaged in two choices, which are rough and smooth.

HOW TO USE

1. Clean the surface from dirt and dust
Mix LB-LCR 40 kg with 13-14 liters of clean water
2. Stir until smooth, for more optimal results it is recommended to use a hand mixer
3. Apply on lightweight floor panels with a thickness of 2-3 mm using a raskam for LB-LCR Smooth and thickness up to 5 cm by using a cement spoon for rough LB-LCR.
5. Blend after half dry
6. For maximum results do curing (moisturizing with watering) on the surface of the lightweight floor panel

42

ADVANTAGE

1. Good adhesion
2. Save material because the coating for the panel surface is thinner
3. The consistency of the mixture is maintained


CONCRETE REPAIR (LB-CR)

 

44LEiBEL Concrete Repair is a mixture of cement, filler, silica sand and
packaged additives, only need to add water and stir it to
used as filler for defective concrete surfaces, holes, rough
or uneven.

Color: ash
Cover: Depends on the volume of the hole.
Water Requirements: 9-10 liters for 40 kg LB-CR and 5-6 liters for 25 kg LB-CR-R.
Packaging: LB-CR Woven 40 kg, LB-CR-R Paper Sack 25 kg.

HOW TO USE

1. Clean the surface from dirt and dust
2. Mix 40 kg LB-CR with 9-10 liters of clean water or 25 kg LB-CR-R with 5-6 liters of clean water
3. Stir until smooth, for more optimal results it is recommended to use a hand mixer
4. Apply LB-CR / LB-CR-R to the concrete surface using a roskam
5. For fillers the recommended thickness is 10 mm – 20 mm
6. For thicknesses of more than 20 mm it is recommended to apply 2x with the first application 1/2 of the total thickness.

42 43 44

 

 

 

 

ADVANTAGE

1. Easy and practical application
2. High adhesion on the concrete surface
3. Can repair porous concrete
4. The consistency of the mixture is maintained

 

>> Back



PLASTER TRASRAM (LB-PT-R)

 

33

Trasram plaster is instant cement for plaster work that has a water-resistant nature that is very good for the outer wall area, wet area (bathroom), foundation area and others. Made from cement, selected sand, fillers and additives which are homogeneously mixed.

Color: Gray green
Application Thickness: Recommended 10-15 mm thickness.
Coverage: Application thickness of 10 mm, coverage ± 2.5 m2
Application thickness of 15 mm, coverage ± 1.7 m2
Water Requirements: 9-10 liters for 50 kg LB-PT-R
Packaging: LB-PT-R Paper Sack 50 kg
HOW TO USE

1. Clean the surface from dirt and dust
2. Add 9-10 liters of water gradually
3. Stir until smooth for 3-4 minutes, it is recommended to use a hand mixer
4. Apply a Leibel Trasram Plaster with a thickness of 10-15 mm on the surface of the masonry using a cement spoon
5. Flatten using jidar so that you get a flat surface

29

 

ADVANTAGE

1. Easy to use and ready to use, just need to add water
2. Minimizing cracks due to expansion shrinkage
3. Savings because the thickness of the plaster is thinner
4. The consistency of the mixture is maintained
5. Impermeable to water

 

>> Back

 



BEPMIX

 

23BEPMIX is instant concrete consisting of a mixture of ingredients
high quality, including cement, sand, aggregates and also
admixture. After being mixed with water, BEPMIX is designed for
produce concrete that is easy to work with and also produces
desired strength.
BEPMIX can be used for concrete casting work between
casting columns, beams, floors, stairs, foundations.2425

2628 27

1. Mixing 4.5 liters of water with 50 kg of BEPMIX
will get 23 liters of concrete volume.
2. Avoid adding excess water.
3. Add water to a maximum of 0.5 liters so that the total water
which is used to be 0.5 liters to get strength
which are desired.
4. To achieve optimal quality, it is recommended
use molem or mixer.

 

 

>> Back